Aeromotive's latest version of the 340LPH fuel pump is out. For use in applications making over 500HP, now includes the filter, JGY price: $115

KA24E rail now ships out polished

JGY KA24E Fuel Rail Kit: $139
Now ships polished (for free)

KA24DE rail now ships out polished

KA24DE (S13 and S14) Fuel Rail: $139

You kept asking, so we delivered, KA24E fuel rail setup for top feed injectors and FPR, and as usual, it carries our lifetime JGY warranty. Set up for domestic size JGY injectors, unless custom ordered.
KA Fuel Rail: $139

This rail is designed with the fuel feed line entering the center of the rail and both ends are open for outlets to the FPR: $200

Aeromotive 340 LPH fuel pump kit, now includes filter kit, rated for 700HP: $115

S13 and S14 255 high pressure Walbro Fuel Pump: $104

Nismo Adjustable Fuel Pressure Regulator, changes fuel pressure for use with 4Bar setup: $134

Injector Dynamics 1700cc Injectors - 60mm Length - 11mm Blue Top - 14mm Lower O-Ring (Set of 4) available in 14mm top as well. JGY price: $974

The ID1700 is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700 was designed to fill the gap between the ID1300 and the ID2000, and like the ID1300, it features corrosion resistant internals making it compatible with all known automotive fuels, you read that right, and that means E85.

A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700 immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700 excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

The ID1700 was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

The ID1700 will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.

If you need flawless drivability on gasoline, then buy the ID1300 will provide this, and is capable of approximately 150hp per injector on E85.

Injector Dynamics ID1050X Injectors 14mm (Purple) (Set of 4): $440
The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.

JGY Top Feed High Volume 550cc (50lb) Injectors
High quality, bench flowed and matched
Guaranteed fitment and function with our rails
Just .75ms latency at 13v
Many applications: $65 each

JGY Top Feed High Volume 750cc (72lb) Injectors
High quality, bench flowed and matched
Guaranteed fitment and function with our rails
Just .75ms latency at 13v
Many applications: $75 each

JGY Top Feed High Volume 1000cc (96lb) Injectors
High quality, bench flowed and matched
Guaranteed fitment and function with our rails
Just .75ms latency at 13v
Many applications: $75 each

440cc injector, small stem style, high impedance, great for CA18DET and to replace your old GTi-R injectors: $59 each

Injector Dynamics 850cc injectors: $125 each (Call for special pricing)

Injector Dynamics 2000cc injectors, 60mm length, 14mm top: $240 each (Call for special pricing)

Injector Dynamics injectors are Bosch injectors that are repackaged and sold with adaptor hats so the height is suitable for most applications, such as the JGY rail
ID 725cc: $120 (Call for special pricing)
ID 850cc: $125 (Call for special pricing)
ID 1000cc: $120 (Call for special pricing)
ID 2000cc: $240 (Call for special pricing)

120lb/1260cc High Impedance Injectors,
fit the JGY rail - $75 each

For all you S14/ S15 guys, here's all you need:
Blitz side feed 555cc: $137 EA
Blitz side feed 850cc: $137 EA
Injector collars: $12.50 EA

MSD Style Injector Connectors - $5 EA

Resistors for low impedance injectors - $4 EA